Furnish and install RPS Duct Mounting Pedestals as manufactured by Roof Products and Systems Corp., Bensenville, IL at all necessary specified points or as shown on drawings. The Duct Mounting Pedestal shall include an Equipment Rail ... (See RPS Equipment rail section for proper style), a matching length steel slide channel attached to "U" shaped mounting brackets and secured to side of equipment rail with Lag Bolts. The duct mounting assembly shall have galvanized 18" long continuous threaded rods for 12" vertical adjustment, lateral adjust spacer bracket for 12" horizontal adjustment, and galvanized slide assembly. Contractor fabricated duct mounting pedestals will not be accepted.
All information is subject to
change without notice. Dimensions and specifications shown are within
manufacturing tolerances.
© Copyright Commercial Products Group of Hart & Cooley, Inc.,
November
2007. All Rights Reserved.
